Products

Backlash-Free Coupling BIPEX-S Elastomer Coupling

Flender

Backlash-Free Coupling BIPEX-S Elastomer Coupling

The BIPEX-S coupling is made up of two aluminum or steel hubs and a polyurethane cam ring. Different cam ring hardness ratings allow the damping ratio and the torsional stiffness to be varied.

Backlash-Free Coupling SIPEX Metal Below Coupling

Flender

Backlash-Free Coupling SIPEX Metal Below Coupling

The SIPEX coupling is made up of two aluminum hubs and stainless steel bellows. Its metal bellows compensate for axial, radial and angular misalignments with only low restoring forces.

Rottler

Cylinder Honing Machine H85AXY

Rottler

Cylinder Honing Machine H87AXY

Flender

Flexible Coupling N-BIPEX Craw Coupling

N-BIPEX allows greater freedom when designing the cam geometry, thereby laying the foundation for the innovative curved design. Unlike the milled cams typically available on the market, this design results in uniform...

Flexible Coupling N-EUPEX DS Pin Coupling

Flender

Flexible Coupling N-EUPEX DS Pin Coupling

N-EUPEX DS® couplings do not have a fail-safe device, allowing positive disconnection of the input and output side upon failure of the flexible elements due to overload or wear. Then, the metal parts of the DS...

Flender

Flexible Coupling N-EUPEX Pin Coupling

Due to their torsional flexibility, N-EUPEX® couplings can move critical torsional vibrations away from the operating area of mechanical equipment in such a way that no negative effects on the drive train are to be...

Flexible Coupling RUPEX Pin & Brush Coupling

Flender

Flexible Coupling RUPEX Pin & Brush Coupling

RUPEX® couplings are used as flexible compensating couplings in all applications requiring a reliable transmission of torque under harsh operating conditions. The conical seats of the buffer pins facilitate mounting...

Highly Flexible Coupling ELPEX Elastic Ring Coupling

Flender

Highly Flexible Coupling ELPEX Elastic Ring Coupling

Owing to its low torsional stiffness and damping properties the ELPEX® coupling is very well suited to connecting machines with considerably non-uniform torque characteristics. Types with a fail-safe device between...

Highly Flexible Coupling ELPEX-B Rubber Tire Coupling

Flender

Highly Flexible Coupling ELPEX-B Rubber Tire Coupling

Highly flexible ELPEX-B® couplings transmit torques without circumferential backlash in machines with non-uniform torque characteristics. They are resistant to wear and maintenance-free. The hubs of the ELPEX-B...

Highly Flexible Coupling ELPEX-S Rubber Disk Coupling

Flender

Highly Flexible Coupling ELPEX-S Rubber Disk Coupling

Owing to its low torsional rigidity and damping properties the ELPEX-S® coupling is very well suited to connecting machines with considerably non-uniform torque characteristics. The inside diameter of the rubber disk...

Hydrodynamic Coupling FLUDEX Fluid Coupling

Flender

Hydrodynamic Coupling FLUDEX Fluid Coupling

Fluid couplings operate according to the Föttinger principle. The coupling parts on the input and output side are not mechanically connected and are therefore wear-free. The torque is transmitted by the fluid movement...