Filter By
Filter By
Flender
Owing to its low torsional stiffness and damping properties the ELPEX® coupling is very well suited to connecting machines with considerably non-uniform torque characteristics. Types with a fail-safe device between...
Flender
Highly flexible ELPEX-B® couplings transmit torques without circumferential backlash in machines with non-uniform torque characteristics. They are resistant to wear and maintenance-free. The hubs of the ELPEX-B...
Flender
Owing to its low torsional rigidity and damping properties the ELPEX-S® coupling is very well suited to connecting machines with considerably non-uniform torque characteristics. The inside diameter of the rubber disk...
Flender
Fluid couplings operate according to the Föttinger principle. The coupling parts on the input and output side are not mechanically connected and are therefore wear-free. The torque is transmitted by the fluid movement...
Flender
FLENDER GKG® cardan couplings are elastic, double-jointed output couplings used to compensate for primary suspension misalignments in the bogie with full torque transmission between the gear unit and the powered wheel...
Flender
FLENDER LBK® connecting rod couplings have a split spacer and can be connected to the gear unit ultra-compactly. Radially arranged rubber elements create two hinge joints, which also make it possible to replace the...
Flender
FLENDER MBG® membrane couplings are two-part, torsionally rigid all-steel couplings with excellent concentricity and outstanding balance quality because they are balanced together with the motor rotor. The...
Flender
Grease-lubricated FLENDER ZBG® gear couplings make the best-possible contribution to safeguarding the maximum availability of your rail vehicle. Millions of kilometers of track, icy Siberian temperatures, extreme...
Flender
ARPEX ART® high performance couplings consist of pure expertise combined with the greatest possible power density. They are used in all high-speed drive systems that require torque transfer where shaft misalignment is...
Flender
With the introduction of the new N-ARPEX® all-steel multi-disk coupling Flender is continuing the success story of the proven ARPEX® series of couplings. The N-ARPEX is currently the most powerful coupling on the...
Flender
ZAPEX ZN® couplings connect machine shafts and compensate for angular and radial misalignment. ZAPEX gear couplings from the ZN series are made of high-quality quenched and tempered steel and are manufactured...
Flender
The double-jointed gear couplings from the ZAPEX ZW® series compensate for angular, parallel and axial misalignment of shafts. They are particularly suitable for use under rough operating conditions. In addition to...
Taiyu
Luluman can be used slightly differently from Pallet Turn. Luluman can be incorporated into machinery as a substitute for bearings, used vertically, or adapted for other tasks which Pallet Turn cannot handle.
Taiyu
Luluman can be used slightly differently from Pallet Turn. Luluman can be incorporated into machinery as a substitute for bearings, used vertically, or adapted for other tasks which Pallet Turn cannot handle.
Taiyu
Luluman can be used slightly differently from Pallet Turn. Luluman can be incorporated into machinery as a substitute for bearings, used vertically, or adapted for other tasks which Pallet Turn cannot handle.
Taiyu
Luluman can be used slightly differently from Pallet Turn. Luluman can be incorporated into machinery as a substitute for bearings, used vertically, or adapted for other tasks which Pallet Turn cannot handle.